Recommended power: YAMAHA 250HP/300HP X 2units Petrol tank: 600L?160GL?
Passengers: 30persons ?including driver?
2 Standard configuration
1) The construction of several sub compartments, each sub compartment
separated water tight.
2) Use of a non-alkali fiber and marine resin for construction:
Resin casting body meets the requirements of the following properties:
Barcol hardness ?35?; thermal deformation temperature ?55?; elongation (%)
3) built by several vertical and horizontal framework to strengthen, set a
strong ribs every two rib distance, strong ribs from bottom to bulwark
transversely through, vertically arranged in the keel and two adjacent keel.
4 ? Boat bow is provided with a full horizontal watertight collision
bulkhead, front of the tank is provided with a full transverse watertight bulk
head. It is PVC sandwich structure, PVC foam on both sides of the fiberglass
with sandwich layer symmetry.
5) Strength the engine installation, U shaped ring parts.
6) The upper and lower boat and other glass fiber reinforced by boat
structure glue, improve the strength.
7) The marine gelcoat, the standard color is white.
8) Deck drains each side 3 pieces, drainage hole is provided with a filter
9) Elevated platform deck in bow, set the storage rooms, ensure the
tightness of closed rooms.
10) Anti-slip deck.
11) According to the engine installation, it is required a pre-buried PVC
pipe for cables, instrument line extension lines, in the console and stern
reserved joints. Easy to install engine
1) 316 stainless steel, nonmetal parts anti-corrosion and UV protection.
2) U ring in bow?6 cleats in aft, middle and bow.
3) 2sets of stainless oil tank under the deck, 300L/set?80gl??Petrol inlet
and maintenance vent is in boat stern portside.
4) Water proof canvas awning can be disassembled, reserved installation
seat for lights.
5) Reinforced transom by stainless plate, withstand the vibration and
thrust of the engines.
6) Console set in bow, storage room under.
7) Console driver seat is made of fiberglass, the seat is provided with a
lie-down rest and storage box under.
8) Passenger seat set in port side, star board and stern. 2 sides seat is
fixed, made by fiberglass, supported by 7 pieces of fiberglass ribs, soft pad
on seat screwed tightly. Stern seat can be opened up.
9) Boarding ladder installed on the starboard boat stern, hinge support
rotation, when not in use it can be rotated up and tied with roof frame
together. When it is not in use it can be rotated down for boarding.
10) Boat sides covered by black D shape anti-collision fender bar(except
engine place) fender thickness not less than 4 inches.
11) 1 set of galvanized steel anchor 9kg and anchor rope?12X25m?1 sets of
5kg anchor and anchor rope?12X40m?
2.3 Engine steering system. Please consider local purchase.